UBX-G8020 chip
u-blox 8 GNSS chip
- Support portal
- Evaluation Kits and partner products
u-blox Support
- Product documentation
Documentation
UBX-M8230-CT chip
Super low power u-blox M8 GNSS chip
UBX-M8230-CT chip is an older generation product. For new designs see:
u-blox M9 standard precision GNSS chips
u-blox M10 standard precision GNSS chip
Ideal for portable applications thanks to Super-E mode
- Super-E mode: ideal balance between low power and good performance
- Optimized for portable & wrist-worn applications
- System power optimization: LNA power saving and data batching
- Concurrent reception of GPS, GLONASS, BeiDou in Super-E mode
- Minimal board space: less than 30 mm2
The u-blox UBX-M8230-CT is an ultra low power GNSS chip optimized for wearable and portable applications. It features the new Super-E mode (Super-Efficient), providing a unique balance between power and performance. Compared with u-blox traditional 1 Hz full power mode, the Super-E mode provides 3 times the power savings while maintaining good position & speed accuracy. Average power consumption over a typical 30 minute track is lower than 20 mW while instantaneous tracking power is less than 10 mW.
Standard
Professional
Automotive
Product variants
UBX-M8230-CT
u-blox M8 low power concurrent GNSS chip, 47 Pin WL-CSP
Related links
Product selection
Product description
Documentation & resources
| Product variants | UBX-M8230-CT |
|---|---|
| GNSS | BeiDou, GLONASS, GPS / QZSS |
| Number of concurrent GNSS | 3 |
| Oscillators | Crystal supported, TCXO supported |
| UART | ✓ |
| SPI | ✓ |
| I2C | ✓ |
| Maximum supply [V] | 3.6 |
| Minimum supply [V] | 1.4 |
| Maximum temperature [°C] | 85 |
| Minimum temperature [°C] | -40 |
| Data batching | ✓ |
| Dimensions [mm] | 2.99 x 3.21 x 0.36 |
Further products
No results have been found for .