- Support portal
- Evaluation Kits and partner products
u-blox Support
- Product documentation
Documentation
- About
- Sustainability
- Partners and Alliances
- Contact
About u-blox
- Investor relations
Investor relations
Error code | Common Error code |
---|---|
1 | U_ERROR_COMMON_BSD_ERROR / U_ERROR_COMMON_UNKNOWN |
2 | U_ERROR_COMMON_NOT_INITIALISED |
3 | U_ERROR_COMMON_NOT_IMPLEMENTED |
4 | U_ERROR_COMMON_NOT_SUPPORTED |
5 | U_ERROR_COMMON_INVALID_PARAMETER |
6 | U_ERROR_COMMON_NO_MEMORY |
7 | U_ERROR_COMMON_NOT_RESPONDING |
8 | U_ERROR_COMMON_PLATFORM |
9 | U_ERROR_COMMON_TIMEOUT |
10 | U_ERROR_COMMON_DEVICE_ERROR |
11 | U_ERROR_COMMON_NOT_FOUND |
12 | U_ERROR_COMMON_INVALID_ADDRESS |
13 | U_ERROR_COMMON_TEMPORARY_FAILURE |
14 | U_ERROR_COMMON_AUTHENTICATION_FAILURE |
15 | U_ERROR_COMMON_OPERATION_IN_PROGRESS |
16 | U_ERROR_COMMON_NOT_CONNECTED |
17 | U_ERROR_COMMON_ALREADY_CREATED |
Error code | AT Error code |
---|---|
31 | U_AT_STATUS_NOT_IMPLEMENTED |
32 | U_AT_STATUS_INVALID_COMMAND |
33 | U_AT_STATUS_INVALID_ARGUMENTS |
34 | U_AT_STATUS_INVALID_ARGUMENT_COUNT |
35 | U_AT_STATUS_INVALID_INT_ARG |
36 | U_AT_STATUS_INVALID_INT_RANGE |
37 | U_AT_STATUS_INVALID_STR_ARG |
38 | U_AT_STATUS_INVALID_STR_LENGTH |
39 | U_AT_STATUS_INVALID_ENUM_ARG |
40 | U_AT_STATUS_INVALID_IP_ADDR_ARG |
41 | U_AT_STATUS_INVALID_MAC_ADDR_ARG |
42 | U_AT_STATUS_INVALID_BD_ADDR_ARG |
43 | U_AT_STATUS_INVALID_BYTE_ARRAY_ARG |
44 | U_AT_STATUS_INVALID_BYTE_ARRAY_LENGTH |
45 | U_AT_STATUS_UNMATCHED_QUOTE |
46 | U_AT_STATUS_TIMEOUT |
47 | U_AT_STATUS_BIN_CMD_EXEC_AS_STD_CMD |
Error code | Wi-Fi Error code |
---|---|
61 | U_WIFI_ERROR_NOT_CONFIGURED |
62 | U_WIFI_ERROR_NOT_FOUND |
63 | U_WIFI_ERROR_INVALID_MODE |
64 | U_WIFI_ERROR_TEMPORARY_FAILURE |
64 | U_WIFI_ERROR_ALREADY_CONNECTED |
65 | U_WIFI_ERROR_ALREADY_CONNECTED_TO_SSID |
66 | U_WIFI_ERROR_ALREADY_DISCONNECTED |
67 | U_WIFI_ERROR_NET_INTERFACE_DOWN |
65 | U_WIFI_ERROR_ALREADY_CONNECTED |
66 | U_WIFI_ERROR_ALREADY_CONNECTED_TO_SSID |
67 | U_WIFI_ERROR_ALREADY_DISCONNECTED |
68 | U_WIFI_ERROR_AP_ALREADY_STARTED |
69 | U_WIFI_ERROR_AP_NOT_STARTED |
Error code | Description |
---|---|
0 | No error |
2 | No such file or directory |
3 | No such process |
4 | Interrupted system call |
5 | I/O error |
6 | No such device or address |
7 | Arg list too long |
8 | Exec format error |
9 | Bad file number |
10 | No child processes |
11 | Try again |
12 | Out of memory |
13 | Permission denied |
14 | Bad address |
15 | Block device required |
16 | Device or resource busy |
17 | File exists |
18 | Cross-device link |
19 | No such device |
20 | Not a directory |
21 | Is a directory |
22 | Invalid argument |
23 | File table overflow |
24 | Too many open files |
25 | Not a typewriter |
26 | Text file busy |
27 | File too large |
28 | No space left on device |
29 | Illegal seek |
30 | Read-only file system |
31 | Too many links |
32 | Broken pipe |
33 | Math argument out of domain of func |
34 | Math result not representable |
35 | Resource deadlock would occur |
36 | File name too long |
37 | No record locks available |
38 | Function not implemented |
39 | Directory not empty |
40 | Too many symbolic links encountered |
41 | Try again |
42 | No message of desired type |
43 | Identifier removed |
44 | Channel number out of range |
45 | Level 2 not synchronized |
46 | Level 3 halted |
47 | Level 3 reset |
48 | Link number out of range |
49 | Protocol driver not attached |
50 | No CSI structure available |
51 | Level 2 halted |
52 | Invalid exchange |
53 | Invalid request descriptor |
54 | Exchange full |
55 | No anode |
56 | Invalid request code |
57 | Invalid slot |
58 | Resource deadlock would occur |
59 | Bad font file format |
60 | Device not a stream |
61 | No data available |
62 | Timer expired |
63 | Out of streams resources |
64 | Machine is not on the network |
65 | Package not installed |
66 | Object is remote |
67 | Link has been severed |
68 | Advertise error |
69 | Srmount error |
70 | Communication error on send |
71 | Protocol error |
72 | Multihop attempted |
73 | RFS specific error |
74 | Not a data message |
75 | Value too large for defined data type |
76 | Name not unique on network |
77 | File descriptor in bad state |
78 | Remote address changed |
79 | Can not access a needed shared library |
80 | Accessing a corrupted shared library |
81 | lib section in aout corrupted |
82 | Attempting to link in too many shared libraries |
83 | Cannot exec a shared library directly |
84 | Illegal byte sequence |
85 | Interrupted system call should be restarted |
86 | Streams pipe error |
87 | Too many users |
88 | Socket operation on non-socket |
89 | Destination address required |
90 | Message too long |
91 | Protocol wrong type for socket |
92 | Protocol not available |
93 | Protocol not supported |
94 | Socket type not supported |
95 | Operation not supported on transport endpoint |
96 | Protocol family not supported |
97 | Address family not supported by protocol |
98 | Address already in use |
99 | Cannot assign requested address |
100 | Network is down |
101 | Network is unreachable |
102 | Network dropped connection because of reset |
103 | Software caused connection abort |
104 | Connection reset by peer |
105 | No buffer space available |
106 | Transport endpoint is already connected |
107 | Transport endpoint is not connected |
108 | Cannot send after transport endpoint shutdown |
109 | Too many references: cannot splice |
110 | Connection timed out |
111 | Connection refused |
112 | Host is down |
113 | No route to host |
114 | Operation already in progress |
115 | Operation now in progress |
116 | Stale NFS file handle |
117 | Structure needs cleaning |
118 | Not a XENIX named type file |
119 | No XENIX semaphores available |
120 | Is a named type file |
121 | Remote I/O error |
122 | Quota exceeded |
123 | No medium found |
124 | Wrong medium type |
Error codeNr | Deauthentication reason code |
---|---|
0 | Undefined error |
1 | Unspecified reason |
2 | Previous authentication no longer valid |
3 | Deauthenticated because sending station is leaving (or has left) independent basic service set (IBSS) or extended service set (ESS) |
4 | Disassociated due to inactivity |
5 | Disassociated because access point (AP) unable to handle all currently associated stations |
6 | Class 2 frame received from nonauthenticated station |
7 | Class 3 frame received from nonassociated station |
8 | Disassociated because sending station is leaving (or has left) basic service set (BSS) |
9 | Station requesting association or reassociation not authenticated with responding station |
10 | Disassociated because of unacceptable information in the power capability element |
11 | Disassociated because of unacceptable information in the supported channels element |
13 | Invalid information (Doesn't follow 802.11 standard) |
14 | Message integrity code (MIC) failure |
15 | 4-way handshake timeout |
16 | Group-key handshake timeout |
17 | Information element in 4-way handshake different from association request, reassociation request, probe response, or beacon frame |
18 | Invalid group cipher |
19 | Invalid pairwise cipher |
20 | Invalid authentication and key management protocol (AKMP) |
21 | Unsupported robust security network (RSN) information element version |
22 | Invalid RSN information element capabilities |
23 | IEEE 802.1X authentication failed |
24 | Cipher suite rejected because of security policy |
32 | Disassociated for unspecified quality of service (QoS)-related reason |
33 | Disassociated because QoS AP lacks sufficient bandwidth for this QoS station |
34 | Disassociated because excessive number of frames need to be acknowledged, but are not acknowledged due to AP transmissions or poor channel conditions, or both |
35 | Disassociated because station is transmitting outside limits of its transmission opportunities (TXOPs) |
36 | Requested from peer station as station is leaving or resetting the BSS |
37 | Requested from peer station as it doesn't want to use the mechanism |
38 | Requested from peer station as station received frames using the mechanism for which a setup is required |
39 | Requested from peer station due to timeout |
45 | Peer station doesn't support requested cipher suite |
Error code | Association status code |
---|---|
0 | Successful |
1 | Unspecified failure |
2 | Tunneled direct link setup (TDLS) wakeup schedule rejected but alternative schedule provided |
3 | TDLS wakeup schedule rejected |
5 | Security disabled |
6 | Unacceptable lifetime |
7 | Not in same basic service set (BSS) |
10 | Can't support all requested capabilities in capability information field |
11 | Reassociation denied due to inability to confirm that association exists |
12 | Association denied due to reason outside scope of this standard |
13 | Responding station doesn't support specified authentication algorithm |
14 | Received authentication frame with authentication transaction sequence number out of expected sequence |
15 | Authentication rejected because of challenge failure |
16 | Authentication rejected due to timeout waiting for next frame in sequence |
17 | Association denied because AP unable to handle additional associated stations |
18 | Association denied due to requesting station not supporting all data rates in the BSSBasicRateSet parameter, where BSS refers to basic service set |
19 | Association denied due to requesting station not supporting short preamble option |
20 | Association denied due to requesting station not supporting packet binary convolutional code (PBCC) modulation option |
21 | Association denied due to requesting station not supporting channel agility option |
22 | Association request rejected because spectrum management capability required |
23 | Association request rejected because of unacceptable information in the power capability element |
24 | Association request rejected because of unacceptable information in the supported channels element |
25 | Association denied due to requesting station not supporting short slot time option |
26 | Association denied due to requesting station not supporting direct sequence spread spectrum orthogonal frequency division multiplexing (DSSS-OFDM) option |
27 | Association denied because requesting station doesn't support high throughput (HT) features |
28 | Pairwise master key (PMK-R0) Key Holder (R0KH) unreachable |
29 | Association denied because requesting station doesn't support phased coexistence operation (PCO) transition time required by the AP |
30 | Association request rejected temporarily; try again later |
31 | Robust management frame policy violation |
32 | Unspecified. Quality of service (QoS)-related failure |
33 | Association denied because QoS AP has insufficient bandwidth to handle another QoS station |
34 | Association denied due to excessive frame loss rates or poor conditions on current operating channel, or both |
35 | Association (with QoS BSS) denied because the requesting station does not support the QoS facility |
37 | Request declined |
38 | Request not successful as one or more parameters have invalid values |
39 | Traffic stream (TS) not created because request can't be honored; however, suggested traffic specification (TSPEC) provided so that the initiating station may attempt to set another TS with suggested changes to TSPEC |
40 | Invalid information element (doesn't follow 802.11 standard) |
41 | Invalid group cipher |
42 | Invalid pairwise cipher |
43 | Invalid authentication and key management protocol (AKMP) |
44 | Unsupported robust security network element (RSNE) information element version |
45 | Invalid RSNE information element capabilities |
46 | Cipher suite rejected because of security policy |
47 | TS not created; however, hybrid coordinator (HC) may be capable of creating TS, in response to a request, after the time indicated in TS delay element |
48 | Direct link not allowed in the BSS by policy |
49 | Destination station not present within this BSS |
50 | Destination station not a QoS station |
51 | Association denied because ListenInterval too large |
52 | Invalid fast transition (FT) action frame count |
53 | Invalid shared key (pairwise master key identifier or PMKID) |
54 | Invalid mobility domain element (MDE) |
55 | Invalid fast transition element (FTE) |
56 | Requested traffic classification (TCLAS) processing not supported by AP |
57 | AP has insufficient TCLAS processing resources to satisfy request |
58 | TS not created because request can't be honored; however, HC suggests station transitions to other BSSs to set up TS |
59 | Generic advertisement service (GAS) advertisement protocol not supported |
60 | No outstanding GAS request |
61 | GAS response not received from advertisement server |
62 | Station timed out waiting for GAS query response |
63 | GAS response larger than query response length limit |
64 | Request refused because home network doesn't support request |
65 | Advertisement server in network not currently reachable |
68 | Request refused because AP doesn't support unauthenticated access |
73 | Unscheduled Automatic Power Save Delivery (U-APSD) coexistence not supported |
74 | Requested U-APSD coexistence mode not supported |
75 | Requested interval or duration value can't be supported with U-APSD coexistence |
76 | Authentication rejected because anti-clogging token is required |
77 | Authentication rejected because the offered finite cyclic group not supported |
78 | The Target Beacon Transmission Time (TBTT) adjustment request not successful because station couldn't find alternative TBTT |
79 | Transmission failure |
80 | Requested TCLAS not supported |
81 | TCLAS resources exhausted |
82 | Rejected with suggested BSS transition |
93 | Association or reassociation refused because of memory limits at AP |
94 | Association or reassociation refused because emergency services not supported at AP |
95 | GAS query response not yet received |
101 | Request failed due to exceeded MCCA access fraction (MAF) limit |
102 | Request failed due to exceeded MCF coordinated channel access (MCCA) track limit, where MCF refers to mesh coordination function |
Error code | Association status code |
---|---|
-0x7180 | Verification of the message MAC failed |
-0x7200 | An invalid SSL record was received |
-0x7080 | The requested feature is not available |
-0x7100 | Bad input parameters to function |
-0x7280 | The connection indicated an EOF |
-0x7300 | An unknown cipher was received |
-0x7380 | The server has no ciphersuites in common with the client |
-0x7400 | No RNG was provided to the SSL module |
-0x7480 | No client certification received from the client, but required by the authentication mode |
-0x7500 | Our own certificate(s) is/are too large to send in an SSL message |
-0x7580 | The own certificate is not set, but needed by the server |
-0x7600 | The own private key or pre-shared key is not set, but needed |
-0x7680 | No CA Chain is set, but required to operate |
-0x7700 | An unexpected message was received from our peer |
-0x7780 | A fatal alert message was received from our peer |
-0x7800 | Verification of our peer failed |
-0x7880 | The peer notified us that the connection is going to be closed |
-0x7900 | Processing of the ClientHello handshake message failed |
-0x7980 | Processing of the ServerHello handshake message failed |
-0x7A00 | Processing of the Certificate handshake message failed |
-0x7A80 | Processing of the CertificateRequest handshake message failed |
-0x7B00 | Processing of the ServerKeyExchange handshake message failed |
-0x7B80 | Processing of the ServerHelloDone handshake message failed |
-0x7C00 | Processing of the ClientKeyExchange handshake message failed |
-0x7C80 | Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Read Public |
-0x7D00 | Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Calculate Secret |
-0x7D80 | Processing of the CertificateVerify handshake message failed |
-0x7E00 | Processing of the ChangeCipherSpec handshake message failed |
-0x7E80 | Processing of the Finished handshake message failed |
-0x7F00 | Memory allocation failed |
-0x7F80 | Hardware acceleration function returned with error |
-0x6F80 | Hardware acceleration function skipped / left alone data |
-0x6F00 | Processing of the compression / decompression failed |
-0x6E80 | Handshake protocol not within min/max boundaries |
-0x6E00 | Processing of the NewSessionTicket handshake message failed |
-0x6D80 | Session ticket has expired |
-0x6D00 | Public key type mismatch (eg, asked for RSA key exchange and presented EC key) |
-0x6C80 | Unknown identity received (eg, PSK identity) |
-0x6C00 | Internal error (eg, unexpected failure in lower-level module) |
-0x6B80 | A counter would wrap (eg, too many messages exchanged) |
-0x6B00 | Unexpected message at ServerHello in renegotiation |
-0x6A80 | DTLS client must retry for hello verification |
-0x6A00 | A buffer is too small to receive or write a message |
-0x6980 | None of the common ciphersuites is usable (eg, no suitable certificate, see debug messages) |
-0x6900 | Connection requires a read call |
-0x6880 | Connection requires a write call |
-0x6800 | The operation timed out |
-0x6780 | The client initiated a reconnect from the same port |
-0x6700 | Record header looks valid but is not expected |
-0x6680 | The alert message received indicates a non-fatal error |
-0x6600 | Couldn't set the hash for verifying CertificateVerify |